|
|
|
|
|
|
|
|
|
|
|
|
|
Hanchett manufactures a welding clamp in two convenient sizes, 8″ and
17″, for proper and safe butting while welding band saws. The saw is
held in position by two clamps fitted with steel plates and adjustable
socket head screws that stay beneath the working surface of the clamp.
The Hanchett welding clamp is equipped with a heating element and a
foot treadle which holds the chill-hardened-face anvil in position for
hammering.
Contact your Sales Representative for quote
|
Our saw hammers are constructed of finely ground, polished steel
selected for its rugged strength and shock resistance. Faces are
precision-ground to provide the best possible face to minimize the
possibility of saw damage by improper blows.
|
Our saw hammers are constructed of finely ground, polished steel selected for its rugged strength and shock resistance. Faces are precision-ground to provide the best possible face to minimize the possibility of saw damage by improper blows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our
saw hammers are constructed of finely ground, polished steel selected
for its rugged strength and shock resistance. Faces are precision-ground
to provide the best possible face to minimize the possibility of saw
damage by improper blows.
|
Our
saw hammers are constructed of finely ground, polished steel selected
for its rugged strength and shock resistance. Faces are precision-ground
to provide the best possible face to minimize the possibility of saw
damage by improper blows.
|
Recommended Saw Gauge: 18
Maximum Saw Gauge: 17
Minimum Saw Gauge: 20
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended Saw Gauge: 18
Maximum Saw Gauge: 17
Minimum Saw Gauge: 20
|
Recommended Saw Gauge: 16
Maximum Saw Gauge: 14
Minimum Saw Gauge: 18
|
Recommended Saw Gauge: 14
Maximum Saw Gauge: 13
Minimum Saw Gauge: 15
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Available in 3, 4, or 5 foot lengths. Standard or Reverse Readings.
Add to cart to see current price.
|
Available in 3, 4, and 5 foot lengths. 1/32 and 1/64" curve options.
Add to cart to see current price.
|
Combination Back Gauge and Straight Edge.
Available in 3, 4, and 5 foot lengths. 1/32" and 1/64" curve options.
Add to cart to see current price.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dresser stick for Jockey Wheels (White, Ruby, Ceramic)
Not appropriate for Diamond Wheels (Use HCC0065C)
|
Dresser stick for Diamond Jockey Wheels (HDD0008G only)
Not appropriate for other Jockey Wheel
|
Replacement Dresser Wheel for Metcalf Dresser (DRESMETC)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use With KPV0001P Green Vinyl Saw Protector
|
Available in gauges 6-21
The Champion Saw Tooth Wrench has two separate slots for straightening bent teeth high
or low.
Order with Champion Saw Tooth Indicator (shown) for maximum performance
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use Replacement Wheel HAA0045A
|
250 foot roll
|
The Champion Saw Tooth Indicator, available in two sizes, is a
time-proven method for accurately checking teeth alignment on a saw. Any
defect is magnified 20 times, to tell at a glance whether a tooth is
straight or sprung to either side.
Order with a Champion Saw Tooth
Wrench (shown)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Band Sharpener wheel arbor aligning gauge, with one plate. (Select Gauge)
|
Base Assembly, less motor for Jockey Grinder (Log Saws)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Base Assembly, less motor for Jockey Grinder (Edger Saws)
|
Number 7 Double Cut post bracket with screw and hand-wheel. Quantity of 2 is shown.
|
Sharpen your inserted tooth saws right in the mill, on the saw mandrel, right on the machine. No changing necessary. Precision ground saws in 5 minutes or less for any type saw tooth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended Saw Gauge: 23
Maximum Saw Gauge: 20
Minimum Saw Gauge: 23
|
Recommended Saw Gauge: 17
Maximum Saw Gauge: 16
Minimum Saw Gauge: 18
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended Saw Gauge: 21
Maximum Saw Gauge: 20
Minimum Saw Gauge: 23
|
Recommended Saw Gauge: 12
Maximum Saw Gauge: 11
Minimum Saw Gauge: 14
|
The 407-S filing clamp offers the convenience of a hinged jaw, which
opens and closes instantly. A lever operated by foot movement quickly
closes and locks the clamp in place. 24″ jaws are constructed of
precision machined cast iron for a stronger, longer-lasting grip.
Each jaw has two surface bearings against the side of the saw for
straight, rigid clamping.
The table top of the 407-S is suitable for holding a swage, shaper, file, set gauge and other common tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This quick, efficient clamp is designed for wide band saw
maintenance. The 417-S is equipped with 30″ jaws, and a locking device to
hold the saw with absolute rigidity at any desired pressure. The opening
jaw is hinged to drop down parallel with the floor for convenient
insertion and removal.
Jaws are constructed of precision machined cast iron providing a rigid grip over the saw’s entire length.
|
The 407 filing clamp offers the convenience of a hinged jaw, which
opens and closes instantly. A lever operated by foot movement quickly
closes and locks the clamp in place. 48″ jaws are constructed of
precision machined cast iron for a stronger, longer-lasting grip.
Each jaw has two surface bearings against the side of the saw for
straight, rigid clamping.
The table top of the 407 is suitable for holding a swage, shaper, file,set gauge and other common tools
|
This quick, efficient clamp is designed for wide band saw
maintenance. The 417 is equipped with 50″ jaws, and a locking device to
hold the saw with absolute rigidity at any desired pressure. The opening
jaw is hinged to drop down parallel with the floor for convenient
insertion and removal.
Jaws are constructed of precision machined, cast iron providing a rigid grip over the saw’s entire length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended Saw Gauge: 17
Maximum Saw Gauge: 16
Minimum Saw Gauge: 18
|
Hanchett manufactures a welding clamp in two convenient sizes, 8″ and
17″, for proper and safe butting while welding band saws. The saw is
held in position by two clamps fitted with steel plates and adjustable
socket head screws that stay beneath the working surface of the clamp.
The Hanchett welding clamp is equipped with a heating element and a
foot treadle which holds the chill-hardened-face anvil in position for
hammering.
|
Recommended Saw Gauge: 12
Maximum Saw Gauge: 11
Minimum Saw Gauge: 14
|
|
|
|
|
|
|
|
#55 Air Swage
List Price: $3,306.00 : $3,306.00 Sale Price: $3,306.00
|
|
|
|
|
|
|
Recommended Saw Gauge: 14
Maximum Saw Gauge: 13
Minimum Saw Gauge: 15
|
|
Hanchett 9900 Band Shaper features a single action lever with right and
left screw pressure on the dies to allow perfectly balanced leverage
over the center of the saw. Carbide jaws are standard.
Its free and sensitive action allow the operator to feel and judge
shape as he goes. The shaper easily passes from one tooth to the next,
picking up each succeeding tooth with a sureness and precision that
greatly aids the speed and uniformity of the work.
These tools are designed for ready adjustment to any desired gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hanchett manufactures a welding clamp in two convenient sizes, 8″ and
17″, for proper and safe butting while welding band saws. The saw is
held in position by two clamps fitted with steel plates and adjustable
socket head screws that stay beneath the working surface of the clamp.
The Hanchett welding clamp is equipped with a heating element and a
foot treadle which holds the chill-hardened-face anvil in position for
hammering.
|
An economically priced band resaw stretcher for smaller shops, the
Model 104-8" handles saws up to 17 gauge and from 2″ to 8″ in width.
The Model 104, with stationary rolls, is ruggedly built with a
cast-iron frame using rolls of high-grade steel. This model also
features a pressure screw that is equipped with heavy load carrying
threads and bearings to evenly exerts and hold roll tension. Both upper
and lower rolls are power-driven for uniform pressure and may be changed
without losing the perfectly attained factory alignment.
A heavy-duty model (104-12") with anti-friction bearings is also available for 10″ and 12″ saws up to 11 gauge.
|
An economically priced band resaw stretcher for smaller shops, the Model 104-8" handles saws up to 17 gauge and from 2″ to 8″ in width.
The Model 104, with stationary rolls, is ruggedly built with a cast-iron frame using rolls of high-grade steel. This model also features a pressure screw that is equipped with heavy load carrying threads and bearings to evenly exerts and hold roll tension. Both upper and lower rolls are power-driven for uniform pressure and may be changed without losing the perfectly attained factory alignment. A heavy-duty model (104-12") with anti-friction bearings is also available for 10″ and 12″ saws up to 11 gauge.
|
|
|
|
|
|
|
|
|
|
|
|
The Model 109 floor-mount saw stretcher easily accommodates single- or double-cut bands up to 14″ wide.
High-grade, tool-steel rolls in anti-friction bearings are uniformly
ground for accuracy in tensioning. These rolls can be ground to a radius
to fit your exact needs. Fast, accurate regrinding of rolls is
available.
The rugged, cast-iron frame is reinforced at crucial stress points to
withstand extreme pressure. The pressure screw is equipped with
anti-friction ball bearings. A replacement set of easily removable rolls
can be ordered to your specifications.
|
|
|
